Pump Guard Mounting Bracket Installations - CardioQuip VivaCart VC-1000 Instructions For Use Manual

9. Pump Guard Mounting Bracket Installations

Pump Guard Mounting Brackets (VC-E-PGM)
securely mount the Maquet Cardiohelp
top shelf of VivaCart.
To install, remove the Removable Upper Shelf
(VC-E-RTS) from the VivaCart.
Clean and prepare the surface of the cart by
applying Isopropyl Alcohol to a paper towel
and wiping down the VivaCart's top shelf
(specifically the "u" area around the cut out).
Next, peel the white adhesive cover from the
bottom of the pump guard mounting bracket
and carefully line up the pump guard mounting
brackets as shown (9.1).
Ensure to line up the two mounts evenly on
each side of the cut-out in the top shelf. Press
firmly on mounting bracket for 30 seconds to
adhere to VivaCart.
Note: the thin side of the pump guard
mounting bracket should hang over the cut out
(see fig. 9.2).
To remove: Pull or twist the mounting bracket
with a large amount of force.
Maquet Cardiohelp is a trademark of Maquet Cardiopulmonary GmbH.
LBL-81 V0
to the
®
16
VC-E-PGM
Pump Guard Mounting Brackets
(set of 2)
Fig. 9.1 Line up Pump Guard
Mounting Brackets
Fig. 9.2 Pump Guard Mounting
Brackets
©2023 CardioQuip, LLC
Thin Side
Overhang