Using The Automatic Log-On; Log-On Sequence Format - Atari XM301 Owner's Manual

4. Type in your log-on sequence. (Read the following section on
the Log-On Sequence Format, to see what kinds of information
strings XE Term supports.) Use the
[Delete Bk Sp]
key or the
[Control]
and the arrow keys to erase mistakes.
This log-on sequence for CompuServe is typical:
1555-1212| [P]AC[W:]00000,000AM[W:]ART-FELIXAM
5.
When you are finished, press
[Return],
The Dialing Menu appears.
6. Press
[Return]
again.
The screen prompts:
Save configuration to disk Y/N?
7. Type Y.
XE Term saves your log-on sequence in a disk file that keeps track
of your Dialing Menu information.
Using the Automatic Log-On
After you create the log-on sequence, you can use it any time.
Follow these steps:
1. Go to the Dialing Menu.
2. Type L.
3. When the screen asks whether to Edit or Do log-on, type
D.
4. XE Term sends the log-on sequence to your XM301 Modem,
which dials the other system, waits for signals from that system,
and logs you on.
To cancel an automatic log-on, press
[Select].
Log-On Sequence Format
You can include four types of commands in your log-on sequence:
• Dial a phone number and wait to connect (this part is identical
to the XE Term phone book).
• Pause for 3 seconds.
• Wait for a certain character before proceeding.
• Send a string of characters.
28