Atari XM301 Owner's Manual page 28

2.
Press
[Select],
XE Term temporarily stops communicating and the Functions
Menu appears on the screen.
3. If you want to send a file using XMODEM, type S. This selects
the Send XMODEM command.
If you want to receive a file using XMODEM, type
R.
This selects
the Receive XMODEM command.
The screen prompts:
File to send:_
or
File to receive: __
4.
Type the drive number and the name of the file. To send a file,
specify an existing file. To receive a file, you can choose any
name within the Atari file-naming conventions. For example, type:
D2:SCHEDULE
to send or receive a file named SCHEDULE on Drive 2. If you do
not specify a drive number, XE Term uses Drive 1.
5.
Press
[Return],
The screen prompts:
Text or Binary?
6.
If you are transferring a text file, type
T.
If you're transferring a
data file or a program, type
B.
XE Term puts you back online. The screen prompts you to Press
START to begin transfer.
7. Be sure the other system is ready to begin transmitting or
receiving the file. Then press
[Start].
Caution:
Do not press
[Start]
until the prompt, Press START to
begin transfer, has disappeared. XE Term will not receive your
[Start]
command while the prompt is displayed.
After you press
[Start],
XE Term begins sending the file or gets
ready to receive the file. The screen prompts:
Press SELECT to stop transfer
21