Making A Back-Up Disk - Atari XM301 Owner's Manual

2. When the BUSY light goes off, remove the XE Term Program
Disk from its protective paper sleeve and insert it into your disk
drive with the label nearest you and facing away until it clicks into
place. Then turn the latch on the disk drive to the closed position.
Note:
If you have more than one disk drive, the XE Term Program
Disk must be in Drive 1.
3. Turn on your computer. The disk drive's BUSY light goes on and
the drive makes a clicking sound.
The XE Term copyright information appears on your screen for a
few moments as the program is loading. Then the Functions Menu
is displayed on the screen.
Buffer size Q14752
Functions Menu
end XMODEM rjialing . . .
eceiue XMODEM Hi le util ities
■ apture text
H - QJdirectories
gpload text Quit to DOS
Your selection ?
■
The Functions Menu is the main menu of the XE Term program
and the starting point of all your telecommunications activities with
the program.
Note:
If you get a boot error when you load your XE Term Program
Disk, refer to your
ATARI DOS 2.5 Manual.
MAKING A BACK-UP DISK
Before you start using the XE Term Program, you should make a
back-up copy of the XE Term Program Disk. Use the back-up copy
as your working disk. If the working copy gets damaged, you can
always make another back-up copy from the original program disk.
Follow the instructions below to make a back-up copy of your XE
Term Program Disk:
1. Load the XE Term program.
2. Press
Q
to select the Quit to DOS function from the Functions
Menu and follow the prompts.
3. When the DOS Menu appears on the screen, press J and then
press
[Return],
The screen prompts:
DUP DISK - SOURCE, DEST DRIVES?
3