Xe Term Functions Menu - Atari XM301 Owner's Manual

4.
Type
1,1
and press
[Return].
The screen prompts you to insert the source disk and press
[Return].
5. Make sure that the XE Term Program Disk is inserted in the
drive and press
[Return].
The disk drive "reads" the information in the source disk. Then
DOS prompts you to insert the destination disk.
6. Remove the XE Term Program Disk from the drive and insert
a new, blank disk.
7.
When the drive's BUSY light goes off, press
[Return],
The screen asks if it is OK to use the program area.
8.
Type
Y.
DOS duplicates your XE Term program disk onto the back-up disk.
When the prompt SELECT ITEM OR RETURN FOR MENU appears,
the duplication process is complete.
Store the original XE Term Program Disk in a safe place. Use the
back-up disk for daily operation of the program. You should label
your back-up disk "XE Term Back-Up Copy" or "XE Term Working
Copy".
Note:
You may also back up your XE Term disk by loading a DOS
disk into your computer and calling up the DOS Menu. Then follow
instructions 3 through 8 above. However, be sure to insert the XE
Term Program Disk into Drive 1 before executing the DOS
DUPLICATE command.
XE TERM FUNCTIONS MENU
Once you've loaded XE Term into your computer, the Functions
Menu appears on your TV or monitor screen. Each of the items
on the Functions Menu is briefly introduced below.
Buffer size
_
end XMODEM ialin9 . . .
eceive XMODEM
ile Utilities
apture text - 0 directories
Qjpload text
u i t to DOS
l_
Vour selection ? ■
j
4