Safety Requirements - Haier GE AZ95H09DACK1 Technical Service Manual

GEA Factory Service Employees are required to use safety glasses with side shields, safety gloves and
steel toe shoes for all repairs.
Brazing Glasses
Dyneema®Cut Resistant
Glove
Prior to disassembly of the water heater to access components,
GEA Factory Service technicians are REQUIRED to follow the
Step 1
Plan and Prepare
Step 2
Shut down the appliance
Step 3
Isolate the appliance

Safety Requirements

Plano Type Safety Glasses
Cut Resistant Sleeve(s)
Steel Toed Work Boot
Lockout / Tagout (LOTO) 6 Step Process:
Step 4
Apply LOTO device and lock
Step 5
Control (discharge) stored
energy
Step 6
"Try It" verify that the appliance
is locked out
– 6 –
Prescription Safety Glasses
Safety Glasses must be
ANSI Z87.1-2003 compliant
Electrically Rated Glove and
Dyneema® Cut Resistant Glove
Keeper