What You Need - Visioneer OneTouch 9220 Installation Manual

4
V O T
ISIONEER NE
9220 USB S
OUCH CANNER
W Y N
HAT OU EED
An IBM-compatible Pentium PC with:
A CD-ROM drive
■
An available Universal Serial Bus (USB) port; 1.1 or 2.0
■
Microsoft Windows operating system: 98, 2000, Me, or XP
■
Available internal memory (RAM) as follows:
■
64 MB or more
■
128 MB recommended for Windows XP
■
200 MB of free hard disk space
■
Note: The new USB 2.0 ports operate at higher speeds than USB 1.1
ports. If your computer is not equipped with USB 2.0 ports, you can
add them with the Visioneer Hi-Speed USB 2.0 PCI Card. Visit the
Visioneer Web site at www.visioneer.com for ordering information, or
contact the dealer where you purchased your Visioneer 9220
OneTouch USB scanner. However, you do not have to add USB 2.0
ports to the computer. Your scanner automatically works with both
USB 1.1 and USB 2.0 ports.
A VGA or SVGA Monitor
Recommended settings for your monitor are as many colors as
possible—High Color (16-bit), True Color (24-bit or 32-bit). Set the
resolution to at least 800 by 600 pixels.
To set your monitor's colors and resolution, open the Windows Control
Panel, double-click Display, and then click the Settings tab.
I G
NSTALLATION UIDE