If The Scanner Is Not Properly Connected - Visioneer OneTouch 9220 Installation Manual

12
V O T
ISIONEER NE
9220 USB S
OUCH CANNER
3. Click OK to close the dialog box. Your scanner is ready to scan.
I S I
F THE CANNER S
If the scanner icon on the Windows taskbar has a red "X" through it,
the scanner is not properly connected.
Check for one of these possible problems:
•
Is a cable loose or not plugged in securely? Inspect all cable
connections. Make sure all the cables are plugged in securely.
•
Is the scanner's power light on? If the light does not come on, plug
the power adapter into another electrical outlet.
•
Is the scanner's locking tab in the locked position? Slide the
locking tab to the unlocked position. If you tried to scan with the
scanner locked, you must restart your computer after unlocking the
scanner.
•
Did you restart the computer after installing the software? If you
didn't restart the computer, it may not have loaded all of the software
files. Try restarting your computer.
I G
NSTALLATION UIDE
N P C
OT ROPERLY ONNECTED