What You Need; Documentation - Visioneer STROBE XP 300 User Manual

W Y N
HAT OU EED
IBM-compatible Pentium 4 PC, or AMD equivalent with:
A CD-ROM drive
■
An available Universal Serial Bus (USB) port; 1.1 or 2.0
■
Microsoft Windows operating system: 2000 (Service Pack 4), XP
■
(Service Pack 1 and 2), or Vista
Windows 2000 and XP: Minimum of 512 megabytes (MB) of
■
internal memory (RAM)
Windows Vista: Minimum of 1 gigabyte (GB) of internal memory
(RAM)
350 MB of free hard disk space
■
A VGA or SVGA Monitor
The recommended settings for your monitor are:
High Color (16-bit) or True Color (24-bit or 32-bit)
■
Resolution set to at least 800 x 600 pixels
■
To set your monitor's colors and resolution:
Open the Windows Control Panel
■
Double-click on Display then select the Settings tab
■
D
OCUMENTATION
Your scanner is delivered with the following documentation:
Quick Install Card—Abbreviated installation instructions.
■
Visioneer Scanner User's Guide—On the Installation CD; contains
■
detailed installation, scanning, configuration, and maintenance
information.
ScanSoft PaperPort User's Guide—On the Installation CD; contains
■
detailed feature and configuration information for the PaperPort
software.
Technical Support Card—Contact information for technical
■
support.
W Y N 3
HAT OU EED