Visioneer OneTouch 9220 Installation Manual page 28

24
V O T
ISIONEER NE
Choose a transparency
scanning option:
Scan 35mm Using:
for 35mm slides
Scan Negative Using:
for negatives
9220 USB S
OUCH CANNER
3. Click Preview to preview the image and adjust settings as needed.
4. See "Adjusting the Settings in the Scan Manager Pro" on page 40
for details about adjusting settings.
Tip: Set the resolution to 1200 dpi or better, Visioneer recommends
using a resolution of 2700 dpi. Refer to, "Adjusting the Resolution
and Sharpness" on page 41 for steps to set the resolution.
5. Click Scan when you are satisfied with the image.
6. When finished, remove the mask from the scanner.
7. If you adjusted the resolution and other settings for scanning slides
or negatives, reset those settings for scanning paper items.
I G
NSTALLATION UIDE