Step 2: Connect The Scanner - Visioneer OneTouch 9220 Installation Manual

8
V O T
ISIONEER NE
9220 USB S
OUCH CANNER
13. When you see the Connect Scanner window, do NOT click Finish.
Leave the window open and proceed to the next section, "Step 2:
Connect the Scanner".
S 2: C
TEP ONNECT THE
Your OneTouch 9220 scanner connects to any available USB 1.1 or
USB 2.0 port. Check your computer's user guide for port locations.
Note: You do not have to shut off the power to your computer when
connecting the scanner to a USB port.
To connect the scanner to a USB 1.1 or USB 2.0 port:
1. Remove all shipping tape from the top and bottom of the scanner.
Slide the locking tab on the bottom to its unlocked position.
Unlocked position
Note: The locking tab protects the scanner's scan head by holding it
securely in position. Lock the scanner when transporting it from one
location to another, but remember to unlock it before scanning. The
scanner will not scan when locked.
I G
NSTALLATION UIDE
S
CANNER