Visioneer OneTouch 9220 Installation Manual page 14

10
V O T
ISIONEER NE
9220 USB S
OUCH CANNER
5. Plug the power adapter cable into the power jack on the back of the
scanner and then plug the power adapter into an AC (wall) outlet.
The following diagram shows the scanner connected to a computer.
The status light on the front of the scanner is illuminated,
indicating the scanner is receiving power.
Your computer recognizes that a scanner has been plugged into the
USB port and automatically loads the appropriate software from
the CD to run the scanner.
Note: If your computer is running Windows XP, you may see
messages about using a USB 2.0 connection for the scanner. If your
computer does not have USB 2.0 ports, disregard the messages.
6. When the software is finished loading, return to the Connect
Scanner window and click Finish.
The scanner's status light is green when the scanner and computer
are communicating properly.
I G
NSTALLATION UIDE
Status light