What You Need; Documentation - Visioneer Strobe XP 300 User Manual

W Y N
HAT OU EED
An IBM-compatible Pentium PC with:
A CD-ROM drive
■
An available Universal Serial Bus (USB) port; your scanner supports
■
both USB 1.1 Full Speed and USB 2.0 High Speed ports
Microsoft Windows operating system: 2000 (Service Pack 4), Me, or
■
XP (Service Pack 1 and 2)
Available internal memory (RAM) as follows:
■
128 MB for Windows 2000 or Me
■
256 MB for Windows XP
■
200 MB of free hard disk space
■
A VGA or SVGA Monitor
Recommended settings for your monitor are as many colors as
possible—High Color (16-bit), True Color (24-bit or 32-bit). Set the
resolution to at least 800 by 600 pixels.
To set your monitor's colors and resolution, open the Windows Control
Panel, double-click Display, and then click the Settings tab.
D
OCUMENTATION
Your scanner is delivered with the following documentation:
Quick Install Card—abbreviated installation instructions.
■
Visioneer Strobe XP 300 Scanner User's Guide—detailed
■
installation, scanning, configuration, and maintenance information.
ScanSoft PaperPort User's Guide—on the Installation CD; contains
■
detailed feature and configuration information.
Online Help
■
W Y N 3
HAT OU EED