If The Scanner Is Not Properly Connected - Visioneer OneTouch 8920 Installation Manual

12
V O
ISIONEER NE
T 8920 S I
OUCH CANNER
I S I
F THE CANNER S
If the scanner icon on the Windows taskbar has a red "X" through it, the
scanner is not properly connected.
Check for one of these possible problems:
•
Is a cable loose or not plugged in securely? Inspect all cable
connections. Make sure all the cables are plugged in securely.
•
Is the scanner's status light on? Turn on the scanner's power. If the
light still doesn't come on, plug the power adapter into another
electrical outlet.
•
Is the scanner's locking tab in the locked position? Slide the
locking tab to the unlocked position. If you tried to scan with the
scanner locked, you must restart your computer after unlocking the
scanner.
•
Did you restart the computer after installing the software? If you
didn't restart the computer, it may not have loaded all of the software
files. Try restarting your computer.
Please see the Readme file in the PaperPort directory on your computer's
hard drive. The Readme file contains additional information that may
help you diagnose problems connecting the scanner. Also see
"Troubleshooting" on page 57 for more information.
G
NSTALLATION UIDE
N P C
OT ROPERLY ONNECTED