If The Scanner Is Not Properly Connected - Visioneer OneTouch 7300 Installation Manual

I S I N
F THE CANNER S
If the scanner icon on the Windows taskbar has a red "X" through it,
the scanner is not properly connected.
Check for one of these possible problems:
•
Is a cable loose or not plugged in securely? Inspect all cable
connections. Make sure all the cables are plugged in securely.
•
Is the scanner's status light on? If the status light does not come on,
check that the USB cable is connected properly to the scanner and
computer.
•
Did you restart the computer after installing the software? If you
didn't restart the computer, it may not have loaded all of the software
files. Try restarting your computer.
Please see the Readme file on the installation CD that you received with
your scanner. The Readme file contains additional information that
may help you diagnose problems connecting the scanner. Also see
"Troubleshooting" on page 56 for more information.
To connect the scanner:
1. After checking for all the above problems, right-click the scanner
icon with the red X over it.
The shortcut menu appears.
S 3: C
TEP
P C
OT ROPERLY ONNECTED
O Y S
HECK UT OUR CANNER
11