Visioneer OneTouch 8920 Installation Manual page 12

8
V O
ISIONEER NE
T 8920 S I
OUCH CANNER
2. Check that the TPA cable is plugged into the TPA port on the back
of the scanner.
Your 8920 scanner is shipped with the TPA cable already plugged
into the TPA port, however, if the cable came loose during
shipping, you must plug it into the port securely.
3. Plug one end of the USB cable into an available USB port on the
computer.
4. Plug the other end of the USB cable into the scanner's USB port.
USB
Some newer computers also have keyboards with USB ports. You
can plug the scanner into the keyboard instead of the USB port on
the computer.
G
NSTALLATION UIDE