Visioneer OneTouch 8920 Installation Manual page 13

If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into the connection.
5. Plug the power adapter cable into the power jack on the back of the
scanner.
6. Plug the power adapter into an AC (wall) outlet.
The following diagram shows the scanner connected to a computer.
Power cord
7. Turn on power to the scanner. The status light comes on indicating
the scanner is receiving power.
Power On/Off switch
Your computer recognizes that a scanner has been plugged into the
USB port and automatically loads the appropriate software from
the CD to run the scanner.
STEP 2: C
ONNECTING THE
USB cable
9
S
CANNER