Scanning From The Button Panel On The Screen - Visioneer OneTouch 8920 Installation Manual

16
V O
ISIONEER NE
T 8920 S I
OUCH CANNER
S
CANNING FROM THE
Scanning from the button panel on the screen is just like pressing a
scanner button, except you click the button on the screen. The scanner
scans the item, and then sends the image either to the printer, or to a
software application on your computer. This method of scanning is
especially helpful if the scanner is not located close to your computer.
To scan from the screen:
1. Place an item to scan on the glass, face down, and click the scanner
icon on the Windows taskbar.
The scanner button panel appears on the screen.
2. Click the button you want to use to scan.
The scanner starts scanning the item; the scan status messages
appear above the Windows taskbar; the progress window shows the
image as it is scanned. When the scan is complete, the scanned
image appears in the destination application.
3. To close the panel when you're finished, click the scanner icon in
the panel's upper left corner.
The icons on the buttons indicate the destination application for the
scanned image. For example, in the illustration above, the icon on the
email button is for the email application, MS Outlook. When you click
the email button, the item is scanned, and then MS Outlook opens. In
this case, the scanned image automatically becomes an attachment to
send with an email message.
A question mark on a button means your computer does not have an
application that corresponds to the button's functions. For example, a
question mark on the Fax button means your computer does not have a
fax application.
G
NSTALLATION UIDE
B
UTTON
P S
ANEL ON THE CREEN