Visioneer OneTouch 8920 Installation Manual page 24

20
V O
ISIONEER NE
T 8920 S I
OUCH CANNER
4. To scan a negative, first slide the filmstrip into the 35mm negative
mask and center the frame you want to scan in the opening.
Then position that mask on the glass and align its square corner
with the arrow on the scanner body. Make sure the text on the mask
faces up.
The 35mm negative mask also has a calibration slot. Do not place
items to be scanned in the calibration slot.
You're now ready to scan the slide or negative.
To scan a 35mm slide or negative:
1. Start the PaperPort software and click the Twain icon on the
toolbar.
The Visioneer Scan Manager Pro appears.
Tip: You can also start the Visioneer Scan Manager Pro from the
scanner buttons by setting a button to "Configure Before Scanning."
See "Selecting New Options for the Buttons" on page 26.
2. Click the drop-down menu at the top of the Scan Manager Pro and
choose the type of transparency to scan.
Scan 35mm Using:—choose this option to scan 35mm slide
positives
Scan Negative Using:—choose this option to scan negative film or
35mm slide negatives
G
NSTALLATION UIDE