Visioneer OneTouch 7300 Installation Manual page 12

8
V O T 7300 USB S I G
ISIONEER NE OUCH CANNER NSTALLATION UIDE
If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into the connection.
2. Plug the computer end of the USB cable into a USB port on your
computer.
USB
Also make sure that the USB plug attaches easily to your
computer's USB port.
The status light on the front of the scanner is illuminated,
indicating the scanner is receiving power.
Status light
Your computer recognizes that a scanner has been plugged into the
USB port and automatically loads the appropriate software from
the CD to run the scanner.