Visioneer OneTouch 7300 Installation Manual page 13

3. When the software is finished loading, return to the Connect
Scanner window and click Finish.
The scanner's status light is green when the scanner and computer
are communicating properly.
4. On the Install Completed window, click Finish.
5. Restart your computer.
After your computer restarts, your scanner is ready to scan.
6. Before proceeding to "Step 3: Check Out Your Scanner", you can
install additional software from the installation CD, or view and
print the scanner and PaperPort documentation.
Remove the CD from the computer when you are finished and
store it in a safe place.
S 2: C S
TEP ONNECT THE CANNER
9