Troubleshooting - Visioneer OneTouch 7300 Installation Manual

56 V O
ISIONEER NE
T 7300 USB S
OUCH CANNER
T
ROUBLESHOOTING
In addition to the troubleshooting information contained in this
section, please see the Readme file on your installation CD. The
Readme file contains additional information that may help you
diagnose problems with the scanner.
If you try all the troubleshooting procedures described in this section
and in the Readme file, and the scanner still has problems, you may
have a malfunctioning scanner. Please see the technical support card
that you received with your scanner for technical assistance telephone
numbers. Also visit our Web site at www.visioneer.com for additional
technical information.
Problem: The scanner won't scan. What's wrong?
Check for one of these possible problems:
•
Is the USB cable loose or not plugged in securely? Inspect the
USB cable connection. Make sure it is plugged in securely.
•
Is the scanner's status light on? If the light is not on, make sure the
USB cable is plugged in securely.
•
Did you restart the computer after installing the software? If you
didn't restart the computer, it may not have loaded all of the software
files. Try restarting your computer.
•
Did you select another TWAIN source for acquiring images? If
you use multiple TWAIN devices with your computer, you may have
selected another source for images. Start the PaperPort software and
click the Scan icon. From the Scanner drop-down list, choose
Visioneer Scan Manager Pro.
Problem: During installation I got the error message: PaperPort
Installation is not complete. What do I do?
The installation procedure was not successful. You need to reinstall the
PaperPort software.
I G
NSTALLATION UIDE