Table of Contents
Advertisement
OVERCURRENT PROTECTOR
• The over-current protector is installed under the hood, which can be
seen when the hood and the cover plate are open.
• The main board is equipped with an automatic recovery fuse. When the
motor is blocked due to overload or improper use, the fuse will automat-
ically disconnect the power unit and turn off the start switch. After 30
seconds then, the fuse will automatically recover.
• The power terminal is equipped with a fusing fuse. When it's short-cir-
cuited, the fuse will fuse. Please replace the spare fuse after the circuit
fault is removed.
12
Advertisement
Table of Contents
