Table of Contents
Advertisement
Basic Measurement Instructions
Measuring Resistance
MEASURING RESISTANCE
NOTE: Do not measure resistance on a live circuit. Doing so will result in incorrect readings and may engage the internal protection
circuitry. Should this occur, wait 5 minutes before taking further measurements.
§
Resistance is measured between the Ω and C terminals. Polarization is not important.
§
The meter uses a 100nA test current in its MΩ ranges and a 100uA test
current in its kΩ ranges.
8
Figure 4: Resistance Measurement
Advertisement
Table of Contents
Need help?
Do you have a question about the DS200 and is the answer not in the manual?
Questions and answers