Package Contents - Innova DS200 User Manual

Introduction
INTRODUCTION
The DS200 Channel Graphing Multimeter is an automotive industry compact 2 channel Bluetooth graphing multimeter connected to a smart
device application that allows for both the initial information to be read and received, but also is opening the gateway into the future of data
intelligence and interpretation. The meter connected to the smart device application, and it can be one of many that can be connected to the
application to provided data for interpretation and analysis to give the user intelligent data; and it is a 2-channel intelligent system; this is the first
set towards data intelligence.
The DS200 Channel Graphing Multimeter (hereafter "The Meter") is a battery powered multimeter capable of handheld and remote.
The Meter meets CAT III IEC 61010-1 3rd edition and 61010-2-030 standards. Overvoltage category III (CAT III) defines a level of safety
appropriate for the transient over voltages present in fixed equipment installations at the distribution level. This includes the mains installation of a
building, distribution boards, busbars, and permanently connected equipment. Do not use this multimeter for CAT IV circuits, which includes any
mains circuits not protected by a building's breakers.

PACKAGE CONTENTS

Innova Meter (1)
1.5V AA Alkaline Batteries installed (2)
12A HRC fuse installed (1)
Test Leads (3)
Carrying case (1)
2