Table of Contents
Advertisement
FLEXIDOME micro 3100i
–
When you use Configuration Manager to access your device for the first time, you must set
the initial password of the device in Configuration Manager. The Users section (General >
Unit Access > Users) displays the message, "Before you can use this device you have to
secure it with an initial password."
Note: After you set the initial password, a "lock" icon appears next to the device name in the
Devices list in Configuration Manager.
You can also launch the device webpage directly. In the device webpage, an initial password
page appears, displaying input fields and a password strength gauge.
Enter the user name ("service") and a password in the appropriate fields. Refer to the
section User Management for more information.
After a service-level password is set for the device, the device displays a dialog box that
prompts users to enter the user name ("service") and the service-level password every time
that they access the device.
1.
2.
Note: New releases of software may require you to set a new and stronger password.
Bosch Security Systems B.V.
Minimum of 1 special character
These special characters are not allowed: '@', '&', '<', '>', ':', '+'
Fill in the fields User name and Password.
Click OK. If the password is correct, the desired page appears.
User manual
Browser connection | en
2023-11 | V01 | F.01U.408.367
11
Advertisement
Table of Contents
