Sony XAV-W600BT Service Manual page 6

XAV-W600/W650BT
3. Processing After the Destination Setting
Be sure to unsolder the SL001 on the MAIN board after doing the
destination setting.
Note: Be sure to unsoleder the SL001 on the MAIN board.
If you do not unsolder, this unit is not operated correctly.
– MAIN Board (Conductor Side) –
SL001
4. Confi rmation After Destination Setting
Execute the following operation after completing the destination
setting, and confi rm a correct destination was set.
Destination setting checking method:
1. Press the reset button on the main unit.
2. Press the [OFF] button on the remote commander.
3. In the state of source off (Home screen is displayed), enter the
test mode by pressing the buttons on the remote commander in
order of the [4] t [5] t [0] (press only the [0] button for two
seconds).
6
4. The following screen is displayed and confi rm that item of the
destination has been rewritten correctly.
(Displayed characters/values in the following fi gure are ex-
ample)
5. The resetting operation is executed by pressing the reset button
after the confi rming ends, and the unit returns to the normal
condition.
SL001
<Test Mode>
1.AUDIO FACTORY MODE
2.AUDIO DEBUG MODE
4.VISUAL FACTORY MODE
6.DESTINATION SETTING MODE
DEST: EUR REGION: 2
MCU: SONY-ST06-150721
Graphic: SONY-TW06-150721
Mecha: SONY-SP02-150721
Servo: HI6CD1-BBA-893D
BT: H28004-V2R133-20001 / XAV-W650BT
BT Addr: 001753767368