WARNING: AVOID INJURY. Read
and understand entire Safety
section before proceeding.
Unpack Unit
Remove unit and all other components from
shipping container. Open bypass valves (see
Moving Unit Manually on page 21). Push unit
from container onto a level surface. Close
bypass valves.
Raise Rollover Protection Structure
(ROPS) Center Bar
See Rollover Protection Structure (ROPS) on
page 18.
Place Discharge Chute
in Operating Position
(992217)
(Figure 3)
WARNING: Do not operate
mower unless the discharge chute
is in the operating position.
Prior to operating the unit, remove the
discharge chute from the transport position
and place the discharge chute in the
operating position.
ASSEMBLY
Discharge Chute in Transport Position
Discharge Chute in Operating Position
EN - 13
Figure 3