Yolink YS6802-UC User Manual page 19

Unpairing
At the Smart Switch (controller), press and hold the POWER bu on for 10-15 seconds un l
the LED quickly blinks green, then red
At the YoLink Plug Mini (responder), press and hold the POWER bu on for 10-15 seconds,
un l the LED quickly blinks blue, then red
Upon un-pairing, either the Smart Switch LED or the YoLink Plug Mini LED will stop blinking and
return to the previous color (Smart Switch: green for turned on, red for turned of, YoLink Plug
Mini: blue for tu rned on, red for turned off)
The YoLink Plug Mini will no longer respond when the Smart Switch is all on
Note
If you want to unpair
the Smart Switch (all
o ff s t a t u s ) w i t h t h e
YoLink Plug Mini , turn
the smart switch into
all off status (verify the
p o w e r s t a t u s L E D
displays red), and let it
enter unpairing mode
POWER Bu on
Hold the POWER button on the
Smart Switch (All on) for 10-15
seconds, until the red light
blinks quickly
1
POWER Bu on
Hold the POWER button on
the YoLink Plug Mini for 10-15
seconds, until the red light
blinks quickly
2
17