Specifications - Alpine CDE-100 Owner's Manual

GENERAL
Specifications
FM RADIO SECTION
Tuning Range 87.7-107.9 MHz
Mono Usable Sensitivity
5 dB/pV (S/N 30 dB)
50 dB Quieting Sensitivity 27.2 dBf( 12.6 pV/75 ohms)
Alternate Channel Selectivity
75 dB
Signal-to-Noise Ratio 62 dB
Stereo Separation 30 dB (at 15 kHz)
Capture Ratio 6.0 dB
AM RADIO SECTION
Tuning Range 530-1,710 kHz
Sensitivity (IEC Standard) 50 pV/27 dB
CD PLAYER SECTION
Frequency Response
20-20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion
0.01% (at 1 kHz)
Dynamic Range
96 dB (at 1 kHz)
Signal-to-Noise Ratio
96 dB (at 1 kHz)
Channel Separation 88 dB (at 1 kHz)
PICKUP
Wave Length 790 nm
Laser Power CLASS I
USB SECTION
USB Requirements 1.1/2.0 Full Speed
Max. Power Consumption 500 mA
USB Class
Mass Storage
File System
FAT 12/16/32
MP3 Decoding
MPEG-1/2 AUDIO Layer-3
WMA Decoding
Windows Media™ Audio
AAC Decoding AAC-LC format ".m4a" file
Number of Channels 2-Channel (Stereo)
Frequency Response* 20-20,000 Hz (±1 dB)
Total Harmonic Distortion
0.01% (at 1 kHz)
Dynamic Range
96 dB (at 1 kHz)
Signal-to-Noise Ratio
96 dB (at 1 kHz)
Channel Separation 88 dB (at 1 kHz)
* Frequency response may differ depending on the encoder
software/bit rate.
FRONT AUX INPUT SECTION
Input Impedance
10 kohms
Allowable External Input
2.0 V
Connector 3.5 mm (p Stereo mini-pin
Power Requirement 14.4 V DC
(11-16 V allowable)
Power Output 18 W RMS x 4*
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and < 1
%
THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Maximum Pre-Output Voltage 2 V/47 k ohms
Bass
±12 dB at 100 Hz
Treble
±12 dB at 10 KHz
Weight 1.2 kg (2 lbs. 9oz)
CHASSIS SIZE
Width
178 mm (7")
Height 50 mm (2")
Depth 160 mm (6-5/16")
NOSEPIECE SIZE
Width
170 mm (6-3/4")
Height
46 mm (1-13/16")
Depth
30mm (1-3/16")
•
Due to continuous product improv ement, specifications and de:
are subject to change without notice.