Table of Contents
Advertisement
Connections
Antenna
(1) Antenna Receptacle
(2) ANT CONT Lead (Blue)
Connect this lead to 'he +B terminal cf '/our power antenna,
if nnpl ratio.
• This lead should be '.;sed only for conlmllins? '.he vehicle's power
antenna. Do nor use this lead to turn on an amplifier etc
(3) AMP CONT Lead (Blue/White)
Connect this lead to the remote turr-on lead ol your amplifier
or signal p-ocessor.
®
Switched Power Lead (Ignition) (Red)
Connect tn s lead to an ooen temina or the vehicle's fuse box
or another un jsed power soume which provides (-)12V only
when the ign ticn is turned on or in tnn acconaory position.
©
Battery Lead (Yellow)
Connect this lead to the positive(+) post of the vehicle's
batter/.
© Ground Lead (Black)
Connect this lead tc a good cnassis grounc on the vehicle.
Make su"e the connection s made to oare metal and is
securey fastened using the shnm motnl screw provided.
(?)
Power Supply Connector
CDt-130 is not compatible with KTF--^5 Fewer Pack.
©
Right Front (+) Speaker Output Lead (Gray)
@ Right Front (-) Speaker Output Lead (Gray/Black)
(®
Right Rear (-) Speaker Output Lead (Violet/Black)
(fi) Right Rear (+) Speaker Output Lead (Violet)
©
Left Rear (+) Speaker Output Lead (Green)
@
Left Rear (-) Speaker Output Lead (Green/Black)
@
Left Front (-) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
@
Fuse Holder (15A)
©
Rear Output RCA Connectors
HLL) is right and Wl IITI is left.
(fl)
RCA Extension Cable (sold separately)
®
Front AUX Input Terminal
Th s terminal allows for input cf audio from an external device
(such as a portable player), using a onmmorninlly avnilacln
converter cab 0.
5Sj)
USB Connection Terminal
Connect USB memory (sold separate'/)
To prevent external noise from entering the audio system.
• Locate tire unit and route the leads at leas! 10 cm away from the car harness.
• Keep the battery power leads as. far away from other leads as possible.
• Connect the ground lead securely Lo a bare metal spot (remove any paint, dirt or grease if necessary) oi" the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
suppressors, contact them for further informed on.
• Your Alpine dealer snows best about noise, prevention measures so consult your dealer for further information.
Advertisement
Table of Contents
