Specifications - Alpine TDM-7582 Owner's Manual

Indication for CD Changer
– – – H
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
E - 01
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
– – – –
• No magazine is loaded into the CD Changer.
- Insert a magazine.
T – – –
• No indicated disc.
- Choose another disc.
EEEE
• Misconnection or disconnection of CD Changer.
- Check connection between CD Changer and control
unit.

Specifications

FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
AM TUNER SECTION
Tuning Range
Usable Sensitivity
TAPE PLAYER SECTION
Tape Speed
Wow & Flutter
Tape Signal-to-Noise Ratio
Frequency Response
With Alpine Test Tape
GENERAL
Power Requirement
Maximum Pre-Output Voltage 2 V/10k ohms
Maximum Power Output*
Continuous Power Output**
Output Voltage
Bass
Treble
Weight
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
Due to continuous product improvement, specifications and
design are subject to change without notice.
* Under maximum operating voltage and input signal,
into 4 ohms.
** 0.8% THD, at 14.4 V battery voltage.
87.7 – 107.9 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
530 – 1,710 kHz
22.5 µV
1-7/8 ips (4.8 cm/sec) ±0.7%
0.06%
60 dB
30–20,000 Hz (±3 dB)
14.4 V DC
(11–16 V allowable)
45 W × 4
19.5 W × 4
500 mV/10 k ohms
±15 dB at 30 Hz
±10 dB at 10 kHz
1.4 kg (3 lbs. 1 oz)
178 mm (7")
50 mm (2")
155 mm (6-1/8")
170 mm (6–3/4")
46 mm (1-13/16")
19 mm (3/4")
13
-EN