Hardware Introduction - LINOVISION POE-SW806GM-Solar User Manual

Hardware Introduction

1 Front Panel
Console Port
2 * 24V Passive/30W Gigabit PoE Port
LED Indicators
PoE(Port 1-2)
PoE(Port 3-4)
Link/Act
PWR
V1\V2
X1\X2
Ring
2 * 90W Gigabit PoE Port
Status Description
Green On
Orange On
Off Off
On
Orange
Off
On
Blink
Green
Off
On
Green
Blink
Off
On
Green
Off
On
Green
Off
On
Green
Off
2 * Gigabit SFP Port
48V 802.3af/at PoE device is connected
24V passive PoE device is connected
No power
PoE device is connected
No power
Port link is established
Data on TX/RX
Port link down
The device's power supply is operating normally, but the
system has not yet been activated.
The device's power supply is operating normally, and the
system initiates without any issues.
The device is power off or failed
The V1/V2 power is normal
The V1/V2 power is off or failed
The corresponding optical fiber port is connected
The corresponding optical fiber port is not connected
Ring setting is established
Ring setting is off or failed
LED Indicators