Salus Gothenburg II Owner's Manual page 33

figure 14a
15. Install Stove and Stove Guard
The stove must be installed by a certified electrician per the manufacturer's manual.
Follow all of the stove's manufacturer's instructions when installing the stove. Please
note that the certified electrician will need to drill a hole in the wall for the power
cord. Assemble the stove wood guard as seen in figure 15. Figures 15a-15c shows
where the wood mounts for the stove need to be installed. Once the stove wood mounts
are installed, the stove wood guard will need to be mounted to the inside of the front
panel. The stove wood guard will serve as protection around the stove.
figure 15
M4*50 =4pcs each backrest
32
Stainless Steel Screws
2 screws for
left side of
each backrest
and 2 screws
for right side
of each
backrest