Salus Gothenburg II Owner's Manual page 31

figure 11a
12. Install Bench Front Wood Plank and Front Bench Lower Reinforcement
Start with the left side. Install the front wood plank as seen in figure 12 and figure 12a. You
can start with either the right or left side first. The bench support wood consists of two pieces
for Gothenburg II, two pieces for Uppsala II, and four pieces for Marstrand II. The bench
support wood will mount vertically. For Gothenburg II / Uppsala II, each bench support will
need to be centered on each bench front wood plank. For Marstrand II, two bench supports
will need to be installed per figure 12a onto the bench front wood plank. Use the two screws
to mount each bench support wood vertically to the bench front wood plank. Do the same for
the opposite side.
figure 12
Bench Support Wood
Bench Front Wood
Plank
31
M4*40 = 3pcs each side
Stainless Steel Screws
M4*50 = 2pcs each side
Stainless Steel Screws