Salus Gothenburg II Owner's Manual page 26

holes will be the 7
These two staves will need to be screwed down to the support cradles. Use the
provided Allen Wrench to screw the M4*50 to mount these staves to the support
cradles. Do not use nails/screws on any staves you just installed except for the
first stave. See figure 4.
figure 4
5. Place Rear Panel Onto Platform
A. First, locate the two pieces that make up the rear wall panel. Use the provided
screws to attach the two rear wall pieces together. Make sure the two sections
are flush at the top and bottom. You will also need to connect the connection for
the lights. See figure 5a & 5b.
figure 5a
figure 5b
th
staves (not counting the first installed stave) on the right and left.
Connection for
Gothenburg II has 6 Stainless Steel Screws
Uppsala II has 6 Stainless Steel Screws
Marstrand
Lights
26
II has 8 Stainless Steel Screws
M4*40
6 Stainless Steel Screws