Assembly Instructions - Salus Karlstad II Owner's Manual

Assembly Instructions

1. Place Bottom Support Cradles
Place the bottom support cradles at their desired locations. See figure 1. Determine
where the front and rear cradles will be positioned. The Karlstad model will have
(3) support cradles. See figure 1a. The end support cradles will have a sticker
indicating where the first stave will screw to the cradle. To avoid damaging your floor, it
is not recommended to move the sauna once it is assembled. If the unit is moved,
please do so carefully and cautiously.
a. Make sure there is a power outlet within reach of the power cord before
assembling the barrel sauna. The light will require a 120V/15AMP outlet.
b. Make sure to position the front door in the correct direction.
2. Fix Bottom Support Cradles
Locate the three staves with pre-drilled holes at both ends. The first stave will have the
drain holes. Place the first of the three staves (the one with the drain holes) on top of
the support cradles. Once the stave is placed into position onto the support cradles,
you can use the provided two M5*50 screws to mount the stave to the support cradles.
See the Components Section on page 5-6 for screw descriptions. Put the other two
staves with the pre-drilled holes aside for now. See figure 2 and 2a.
figure 1
figure 1a
12