Salus Karlstad II Owner's Manual page 20

13. Install Wood Cover for Right Side Light Wire and Short Backrest with Accent Light
Locate the wood cover for right side light wire and short backrest with accent light. Install the
wood cover for right side light wire with the provided screws as seen in figure 13. Next, install
the short backrest with accent light using the provided screws. Be sure to connect the cord
for the lights to receive power. See figure 13a and 13b.
figure 13
You will need to follow steps 13a through 13b and below (note: for the left side, the long bench
back wood plank will need to be installed before the left side bench support panel) for
installing the Left Side Bench Support Panels, Long Bench Back Wood Plank, Long Bench
Front Wood Plank, Bench Support Wood, Long Bench, and Long Backrest with Accent
Light. See figure 13c, 13d, 13e, and 13f.
figure 12a
figure 13a
20
figure 13b