Table of Contents
Advertisement
WARNING
OR REPAIR. DO NOT OPERATE THE UNIT IN CLOSE PROXIMITY TO COMBUSTIBLE
SURFACES OR MATERIALS. ALLOW THE UNIT TO COOL BEFORE SHUT DOWN. REMOVE
BATTERY IF THE HEATER IS NOT IN USE.
1. Remove existing screws from shell ring on
either side of heater (see Figure 3) .
Figure 3
Figure 5
Heat Shield
© 2023 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING
OR WHILE CONNECTED TO A POWER SOURCE
SAFETY INFORMATION (CONT.)
HEATER IS INTENDED FOR USE WITHOUT DUCTS. DO NOT
CONNECT TO DUCTS. DO NOT TAMPER WITH THE UNIT.
HAVE A COMPETENT SERVICEMAN MAKE ANY ADJUSTMENT
ASSEMBLY
IMPORTANT: INSTALL HEAT SHIELD BEFORE
OPERATING YOUR 80TBOA-OFR HEATER
2. Line up holes on heat shield with holes in
shell ring. Attach with screws removed in
step 1 (see Figures 4 and 5).
Figure 4
5
Kerosene Radiant Heater User's Manual
Advertisement
Table of Contents
