Industrial Flat Panel Monitors
Wiring the Monitor
10
Wiring the Monitor
There are several electrical connections to be made depending on your exact monitor configu-
ration. All connectors are located in the middle of the rear enclosure and designed for space
saving cable routing.
1.
Analog or Digital Video Input
The analog input is an industry-standard, 15-pin VGA connector with 3 rows of 5 pins each.
The digital input is an industry standard, 29-pin DVI connector with 3 rows of 8 pins each. You
must supply a high-quality cable between this connector and the video port on your computer,
maximum 100 feet (30 meters) for the analog input and maximum 15 feet (4.5 meters) for the
digital input.
Figure 10.1
2.
NTSC Video Input (option)
This is an industry-standard, BNC connector. You must supply a coaxial cable between this
connector and the live video port on your camera, video player, etc.
Figure 10.2
17