DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE. SUCH USE MAY RESULT IN FIRE, ELECTRICAL SHOCK OR OTHER PERSONAL INJURY. DO NOT use the handle or oven door to lift the oven. The oven is heavy – use extreme care when handling!
Cutout Dimensions, Electrical Requirements & Parts Electrical Requirements • The electrical requirements for this oven are 40 volts, 15 amps. The oven has a 6-15 plug and requires a 6-15 receptacle. • At the rear of the opening, provide a 3 pronged, polarized, electrical outlet, 40 volt AC, 15 amp or larger.
• When removing the appliance for service, disconnect AC power supply and carefully remove the appliance by pulling forward. • CAUTION: The oven is heavy – use care when handling! • The electrical requirements for this oven are 40 volts, 15 amps. The oven has a 6-15 plug and requires a 6-15 receptacle.
Page 6
Assembly. Avoid pinching the cord between the oven and the wall. TRIM KIT INSTALLATION: Place the FRAME ASSEMBLY over the oven. Make sure the inside of the top of the frame rests on the black frame support. Screw A NOTE: Make sure the duct is centered in the opening.
Record the following information indicated at right. You will need it if service is ever required. The serial number and model number for your oven are located on the identification plate mounted on the oven cavity.
Page 8
Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (66) 455-100 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.com F0446 TINSEB468MRR0...