Viking Professional VHSO205 Installation Manual page 6

Installation
1
Place the Bottom Duct in the opening. When the Bottom
Duct Assembly is in the opening correctly, the flanges will
be tightly against the lower edge of the opening.
3
OVEN INSTALLATION: Carefully guide the oven into the
prepared opening. Slide the oven on the Bottom Duct
Assembly. Avoid pinching the cord between the oven
and the wall.
5
TRIM KIT INSTALLATION: Place the FRAME ASSEMBLY
over the oven. Make sure the inside of the top of the frame
rests on the black frame support.
2
Screw A
NOTE: Make sure the duct is centered in the opening.
(X = X as illustrated.) Secure the Bottom Duct Assembly
with two (1 3/16") screws (A).
4
OVEN INSTALLATION: Adjust the position of the oven
so that the feet of the oven are fitted into the recesses
of the Bottom Duct Assembly
6
Screw B
Screw B
TRIM KIT INSTALLATION: Center the frame. Mark and
predrill 4 holes with a 1/16" bit. Secure the frame with
4 screws (B).
6 6
Screw B
Screw B