Advertisement
Quick Links
GTR066
Wireless Keypad
Compatible with the following Richmond motors.
Sliding / Cantilever Motors
✓
GTR156 & GTR212
!
GTR099
!
GTR500 & GTR501
!
Compatible when used with a Richmond GTR197 external receiver.
Technical Specs:
•
Power Supply: DC 6V (4 x AAA batteries).
•
Standby Current: 18uA (Sleep mode), 6mA (working mode).
•
Working Current: 28mA (working mode).
•
Two channel RF 433MHZ frequency. HCS301 rolling code.
•
IP44 rating. Suitable for outdoor use.
Additional Features:
•
Pre-set default PIN for each channel.
•
Multiple PIN allowance for each channel.
•
Keypad security lock after 3 incorrect PIN entries.
•
Anti-vandal alarm for unauthorised disassembly.
•
Keypad buzzer and backlight can be turned on/off.
•
Low battery indicator.
•
PIN disguising during public view.
3 colour LED display – (Red, Green, Blue)
•
GTR061 & GTR207
Swing Motors
!
GTR058
GTR062 & GTR078
GTR502 & GTR503
GTR066 wireless keypad manual – rev 03
✓
!
!
Factory default PINs:
•
Programming: 0 0 0 0
•
Channel 1: 1 1 1 1
•
Channel 2: 2 2 2 2
Scan for additional
information
Scan for additional
information
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Richmond GTR066
Summary of Contents for Richmond GTR066
- Page 1 GTR099 GTR058 GTR062 & GTR078 GTR500 & GTR501 GTR502 & GTR503 Compatible when used with a Richmond GTR197 external receiver. Technical Specs: • Power Supply: DC 6V (4 x AAA batteries). • Standby Current: 18uA (Sleep mode), 6mA (working mode).
- Page 2 One short beep will sound to confirm. c. Key in your new 4-digit programming PIN, followed by # key. One long beep and one short beep follow to confirm. d. Your new programming PIN will now be set. GTR066 wireless keypad manual – rev 03...
- Page 3 Enter the PIN for the channel you want check and then press the # key. The keypad will sound a long beep either once or twice, to indicate the channel being used. d. The keypad will exit programming mode when complete. GTR066 wireless keypad manual – rev 03...
- Page 4 8 beeps will sound to indicate that the process is finished, and the keypad has been reset. Factory default master pin code: 0 0 0 0 Factory default pin code for 1 channel: 1 1 1 1 Factory default pin code for 2 channel: 2 2 2 2 GTR066 wireless keypad manual – rev 03...
Need help?
Do you have a question about the GTR066 and is the answer not in the manual?
Questions and answers