Advertisement
GTR180
Wireless Keypad
Instruction Manual
Please note: This product is compatible with GTR064,
GTR156, GTR212, GTR207 and GTR061 gate motors.
How to pair the keypad to your gate opener:
1. Press button "LEARN" on Control Panel of Gate Opener on the Gate #1 until the LED on the control board lights up.
Please note: the learn button must be released as soon as the LED on the control board lights up. If the button is held for too long it will erase
all remotes paired to the gate opener.
2. Input password (the default password is 11), and press button
3. The "LEARN" LED will start to flash and then turn off;
4. The keypad has now been paired.
5. To open the gate #1 Input password (default password is 11) and press button
How to pair the keypad to a second gate or add a second code
1. Press button "LEARN" on Control Panel of Gate Opener on the Gate #2 until the LED on the control board lights up;
Please note: the learn button must be released as soon as the LED on the control board lights up. If the button is held for too long it will erase
all remotes paired to the gate opener.
2.Input password (the default password is 22), and press button
3. The "LEARN" LED will start to flash and then turn off;
4. The keypad has now been paired.
5. To open the gate #2. Input password (default password is 22) and press button
How to change password to Gate #1:
1. Press and hold button
2. Whilst still holding
3. Release button
, then release button
4. Input current password
press button
5. Input your new desired password (max 8 digits),
and press button
6. Re-input new password, press button
7. The password has now been changed.
press and hold button
, and
(default password is 11)
GTR180 wireless gate keypad manual – revision 02
twice.
twice.
How to change password to Gate #2:
1. Press and hold button
2. Whilst still holding
3. Release button
, then release button
4. Input current password
and press button
5. Input your new desired password (max 8 digits), and
press button
6. Re-input new password, press button
7. The password has now been changed.
press and hold button
,
(default password is 22)
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Richmond GTR180
Summary of Contents for Richmond GTR180
- Page 1 5. Input your new desired password (max 8 digits), and and press button press button 6. Re-input new password, press button 6. Re-input new password, press button 7. The password has now been changed. 7. The password has now been changed. GTR180 wireless gate keypad manual – revision 02...
- Page 2 Using an Allen Key, remove the 2 screws After screws are removed, lift the housing. The located either side of the panel. rear plate should drop away. GTR180 wireless gate keypad manual – revision 02...
- Page 3 Once the base plate and surround is mounted you can replace the main body. Then replace the 2 screws. Once this is done, the blue face plate can be put back into position. GTR180 wireless gate keypad manual – revision 02...
Need help?
Do you have a question about the GTR180 and is the answer not in the manual?
Questions and answers