Please wait for mild temperatures before testing the Questions? cooling system. • You must follow all local codes and ordinances for Visit answers.alarm.com wiring the system. or contact your service provi...
Page 3
➊ ➋ ➌ Overview ➋ Thermostat ➊ ➊ Status LED ➋ Button Display ➌ Settings menu ➍ Current setpoint To change the setpoint, ➍ ➎ tap on the up or down arrow. ➎ Indoor temperature ➏ Current mode ➌ To change the mode, tap on the current mode icon ➍...
Page 4
➌ • Damp areas will not only affect the humidity reading Turn off power to the HVAC unit. CAUTION: Wiring can vary fo onsiderations but could lead to corrosion and shorten the lifespan Identify all wiring designatio of the thermostat. •...
Page 5
➌ CAUTION: Do not insert more than one wire into a wire After all wires are inserted into the wire terminals, nstallation Display installat terminal as this will damage the wire terminal. If you restore power to the HVAC system. only have one R wire, there is no need to physically jump RH and RC.
Additional configuration Troubleshooting Problem Cause he cool mode during • Although the default settings will be appropriate in mild weather to most cases, you also have the option to change all configuration settings via the Display. Heating or cooling does not turn on To prevent damaging the •...
Page 7
Cause Problem Cause How do I reset my Smart • To find the Z-Wave settings, I am moving or re-setting up my • The Smart The Wave open the Navigation menu Thermostat HD to the smart home network and need reset to its fac proceed to the relevant settings.
Page 8
être co-localisés ou fonct your HVAC control will not antenne ou transmetteur. behave as expected. Please contact your HVAC Questions? professional to remedy the situation as soon as possible. Visit answers.alarm.com or contact your service provi...
Need help?
Do you have a question about the ADC-T40K-HD and is the answer not in the manual?
Questions and answers