Lp Gas Connections; What Is A Regulator; Regulator Connections - Weber 3200 Owner's Manual

IMPORTANT INFORMATION ABOUT LP GAS CONNECTIONS

WHAT IS A REGULATOR?

Your WEBER gas grill is
equipped with a pressure
regulator, which is a device
to control and maintain
uniform gas pressure as gas is
released from the LP tank.

REGULATOR CONNECTIONS

Each WEBER LP regulator is designed for vapor withdrawal
and is equipped with a UL-listed Type 1 tank connection
as described in the latest edition of ANSI Z21.58. THE LP
TANK THAT YOU CONNECT TO THE REGULATOR MUST BE
EQUIPPED WITH A COMPATIBLE TYPE 1 CONNECTION IN
THE TANK VALVE. This Type 1 connection allows you to
make a fast and safe hookup between your WEBER gas grill
and the LP tank.
NOTE: Gas will not flow from the tank unless the Type 1
coupling is fully engaged.
• The pressure regulator supplied with the WEBER gas
grill must be used. This regulator is set for 11 inches of
water column pressure.
• Replacement pressure regulator and hose
assemblies must be those specified by Weber-Stephen
Products LLC.
• Be sure the regulator is mounted with the small vent
hole pointed downward so that it will not collect water.
This vent should be free of dirt, grease, bugs, etc.
• The gas connections supplied with your WEBER gas
appliance have been designed and tested to meet 100%
of CSA and ANSI requirements.
m WARNING: Replacement LP tanks must
match the regulator connection supplied
with this WEBER gas appliance.
2
1
2
1
1 Type 1 Valve
2 Hand Wheel
3 External Thread
TYPE 1 CONNECTIVE COUPLING
3
3
4
5
5
4
4 5
Thermally Sensitive Nut
Propane Regulator
WWW.WEBER.COM
21