Yamaha MXT9L 2019 Manual page 43

To install the passenger seat
1. Insert the projection on the front of
the passenger seat into the seat
holder as shown, and then push
the rear of the seat down to lock it
in place.
1
2
1. Projection
2. Seat holder
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat, and
then remove the hexagon wrench
located on the bottom of the seat.
Instrument and control functions
1. Hexagon wrench
2. Remove the bolts with the hexa-
gon wrench.
1
1. Bolt
3. Lift the rear of the rider seat and
pull it backward.
4-25
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then place the seat
in the original position.
1
1
2
1. Projection
2. Seat holder
2. Install the bolts with the hexagon
wrench.
3. Insert the hexagon wrench back
into its holder on the passenger
seat.
4. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
4