Yamaha MXT9L 2019 Manual page 33

To adjust the display brightness
1. Turn the key to "OFF".
2. Push and hold the "MENU"
switch.
3. Turn the key to "ON", and then re-
lease the "MENU" switch after five
seconds.
4. Push the "SELECT" switch up or
down to select the desired bright-
ness level.
5. Push the "MENU" switch to con-
firm the selected brightness level.
The control mode changes to the
shift light on / flash / off setting
function.
To set the shift light on / flash / off
1. Push the "SELECT" switch up or
down to select one of the follow-
ing style settings:
 On setting: the shift light will
come on when the set engine
speed is reached. This setting
is selected when the indicator
light is lit continuously.
 Flash setting: the shift light
will flash when the set engine
speed is reached. This setting
Instrument and control functions
is selected when the indicator
light flashes four times per se-
cond.
 Off setting: the shift light is
deactivated. This setting is
selected when the indicator
light flashes once every two
seconds.
2. Push the "MENU" switch to con-
firm the selection. The control
mode changes to the shift light on
r/min setting function.
To set the shift light on r/min
The shift light can be set between 6000
r/min and 12000 r/min in increments of
200 r/min.
1. Push the "SELECT" switch up or
down to select the desired engine
speed for activating the indicator
light.
2. Push the "MENU" switch to con-
firm the selected engine speed.
The control mode changes to the
shift light off r/min setting function.
4-15
To set the shift light off r/min
The shift light can be set between 6000
r/min and 12000 r/min in increments of
200 r/min. Be sure to set the off r/min
to a higher engine speed than the on
r/min setting, otherwise the shift light
will not come on.
1. Push the "SELECT" switch up or
down to select the desired engine
speed for deactivating the indica-
tor light.
2. Push the "MENU" switch to con-
firm the selected engine speed.
The control mode changes to the
shift light brightness setting func-
tion.
To adjust the shift light brightness
1. Push the "SELECT" switch up or
down to select the desired shift
light brightness level.
2. Push the "MENU" switch to con-
firm the selected brightness level
and exit the control mode.
4