Yamaha MXT9L 2019 Manual page 31

When the last segment of the fuel me-
ter starts flashing, the display changes
to the fuel reserve tripmeter "TRIP F"
and starts counting the distance trav-
eled from that point. In this case,
push " " to change the display in the
following order.
TRIP F → km/L, L/100 km, or MPG →
AVE – –.– km/L, AVE – –.– L/100 km, or
AVE – –.– MPG → °F (coolant) → °F Air
→ ODO → TRIP 1 → TRIP 2 → TRIP F
TIP
 Push "
" to change the display
in the opposite order.
 To reset a tripmeter, push the
"RESET" button for one second.
 The fuel reserve tripmeter can be
reset manually, or you can allow it
to reset automatically after refuel-
ing and traveling about 5 km (3
mi).
Instrument and control functions
Instantaneous fuel consumption
1
1. Instantaneous fuel consumption display
Instantaneous fuel consumption can
be set to "km/L", "L/100 km", or
"MPG".
 "km/L": the distance that can be
traveled on 1.0 L of fuel
 "L/100 km": the amount of fuel
necessary to travel 100 km
 "MPG": the distance that can be
traveled on 1.0 US gal of fuel
TIP
 To switch between "km/L", "L/100
km", and "MPG", push the "RE-
SET" button for one second.
 When traveling under 10 km/h (6
mi/h), "– –.–" is displayed.
4-13
Average fuel consumption
1
1. Average fuel consumption display
Average fuel consumption can be set
to either "AVE – –.– km/L", "AVE – –.–
L/100 km", or "AVE – –.– MPG".
 "AVE – –.– km/L": the average dis-
tance that can be traveled on 1.0 L
of fuel
 "AVE – –.– L/100 km": the average
amount of fuel necessary to travel
100 km
 "AVE – –.– MPG": the average dis-
tance that can be traveled on 1.0
US gal of fuel
TIP
 To reset the average fuel con-
sumption, push the "RESET" but-
ton for one second.
4