Presetting The Stations Automatically; Presetting The Stations Manually - Samsung SV-L625K Instruction Manual

Presetting the Stations Automatically

PROG OPTIONS INSTALL INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿¤¤
œ ❷¤¤ OK END: MENU
GB
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
❿
END: MENU
œ ❷
YOUR DATA WILL BE LOST
PRESS OK TO CONTINUE
MENU TO EXIT
AUTO SET UP
PLEASE WAIT
2%
I--------------------I
END:MENU
18
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
Your VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 19)
You can store up to 50 stations.
To enable the VCR to decode a scrambled TV station, the
decoder must be activated after the scan (see pages 19).
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
œ ❷¤
INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4 Press the corresponding or buttons, until the
œ ❷
option is selected. And then press the ❿ button to select this
UP
option.
5 Press OK to start the auto scanning.
Result: The PLEASE WAIT indication flashes on the
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The VCR then searches for the second station and so on.
When the automatic scanning procedure has
finished, the VCR switches automatically to pro-
gramme 1.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
6
If you wish to cancel the auto scanning before the end, press the
MENU button three times to exit the menu.
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 20).

Presetting the Stations Manually

You do not need to preset the stations manually if you
have already set them automatically.
To enable the VCR to decode a scrambled TV station, the
decoder must be switched on.
1 Press the MENU button on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
INSTALLATION
3
Press the OK button to select this option.
Result: The
INSTALLATION
4
Press the corresponding
UP option is selected.
Press the ❿ button to select
5
Result: The TV STATION TABLE
6
Press the or
œ ❷
required.
Press the ❿¤button to preset the station.
7
Result: The MANUAL TUNING
8
Press the corresponding
AUTO SET
Press the ➛ or ❿ buttons to start scanning.
Result: The frequency band is scanned and the first station
found is displayed.
If you know the number of the channel you want, press the
numeric buttons on the remote control for example, for channel
E21, first press "0" and then press "2", "1" (see page 44).
9
If you...
Wish to store the
station displayed
Do not wish to
store the station
displayed
10
Repeat this procedure from Step
stations have been stored.
11 On completion, press the MENU button three times to exit the menu.
or ➛, ❿¤buttons to select the
,
œ ❷¤
option.
menu is displayed.
œ or ❷ buttons, until the MANUAL SET
MANUAL SET UP option.
menu is displayed.
buttons to select a programme number as
menu is displayed.
œ or ❷ buttons, until the CH is selected.
Then...
Press the corresponding or buttons,
œ ❷¤
until the is selected.
MFT
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press OK to store the station .
Press the corresponding or buttons,
œ ❷¤
until the CH is selected.
Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
9
Go back to the beginning of Step
6
onwards, until all the required
PROG OPTIONS INSTALL INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿¤¤
œ ❷¤¤ OK END: MENU
INSTALL
GB
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
❿
œ ❷ END: MENU
** TV STATION TABLE **
PR CH
1 002
2 ---
3 ---
4 ---
5 ---
❿
œ ❷ SWAPPING:OK
DELETE:CLR/RST MENU
** MANUAL TUNING **
PR : 1
CH : ---
MFT : -
➛❿
œ ❷ MEMORY: OK
END: MENU
19